P16 louver led screen
LED louver is a new design for outdoor glasswall and mesh ,high transparency, high brightness,ultra light weigh,flexible control.it is the first choice for the indoor and outdoor display
The light bar width is less than 8mm, so that its transparency is up to 50%, it could be installed inside or outside of glass wall, do not affect indoor brightness. If installed it on the roof, can reduce the wind resistance effectively.
2. High brightness
Adopts SMD3535 with good color uniformity, brightness up to above 5500CD per sqm., completely meet requirements of daytime display.
3. Easy maintenance
This LED light bars can be maintained from both front and rear that can choose different maintenance method according to different application sites. For example, you can choose front maintain if installed before facade of building, also can choose rear maintenance if installed behind glass wall.
4. Easy control
Adopting parallel transmission, each light bar can work independently, do not effect other light bars work. Light bar can be customized to meet any different requirements.
5. High level protection
IP66, it is suitable for indoor or outdoor application. It use aircraft aluminum extrusion, the surface is treated with special environmentally-friendly dichromate solution, with good cooling and anti-corrosion function.
6. Light weight
The weight is less than 18kg per square meter, easy to transport, and easy to control labor and delivery cost.
|Pixel per tile||64×16|
|Configuration||SMD 3 in 1|
|Tile dimension||1024mm x 256mm x 59mm|
|Max Power per tile||180W /set|
|Control Mode||PC or SD card|
|Strip Orientation||Horizontal or Vertical|
|Installation||Hanging by steel,frame method|
We use three steps to make sure the LEDs to avoid physical hurting as below.
1. Fixed LEDs into the PCB, then welding the PCB into the drive board.
2. Put the welded parts into the aluminum groove, then process glue filling.
3. Press the PC cover into the surface of products.